CORE PRO EDGE.

Macadam Install Notes.

Lay macadam to manufacturers’ guidelines.

Macadam advice notes:

Leave a 4-6mm gap between joined lengths of edging to allow for thermal expansion, hot macadam should not exceed 180C

As with all edge restraints, ensure adequate haunching or additional hard surfacing is in place before heavy compaction of macadam courses.

Ensure the first pass of the roller is 50mm clear of edge restraint subsequent passes can then proceed closer to the edging, final pass on the wearing course can pass over the aluminium edging.

Resin Bound Install Notes.

Screw and plug into an existing hard surface or spot stick to porous macadam.

Lay resin to manufacturers guidelines, directly up to the CORE PRO EDGE  – trowel and compact to a clean neat finish.

Please do not hesitate to contact our technical team for further site-specific information

Joining CORE PRO EDGE.

Join individual lengths using the connector strips supplied.

Slide the connector into the channel on the rear of the profile, line up the next length of edging and slide the connector back halfway into the channel of the adjoining length.

Creating Curves.

Curves can be easily created by using a pair of pliers to snap out the tabs exactly where you need to create your curves.

We designed it with versatility in mind to create the perfect ‘2 in 1’ product - if you need a strong straight line, leave the tabs in, and when your project requires curves, you simply snap them out precisely where you need to. This gives you the flexibility to combine truly straight lines with perfect curves,  all from one edging.