- Products
-
CORE EDGE Flexible Steel Edging & Tree Rings
-
CORE DRIVE Gravel Driveway Stabiliser
-
CORE Tree Root Protection ‘No Dig’ Construction
-
CORE VUBA Resin Distribution Centre
-
CORE DATUM EDGE Heavy Duty Landscape Edging
-
CORE COMMERCIAL Heavy Duty Gravel Stabiliser
-
CORE DRAINAGE Drainage Cells & Board
-
CORE PRO EDGE Aluminium Landscape Edging
-
CORE PATH Gravel Pathway Stabiliser
-
CORE WATER CRATE Soakaway & Attenuation Crates
-
CORE GRASS Grass Reinforcement & Protection
-
CORE GEOSYNTHETICS Geogrids & Geosynthetics
-
CORE PLANTERS Commercial Planters
-
CORE EQUESTRIAN Specialist Equine Surfacing
-
CORE GLOW Glow In The Dark Aggregates
-
- Case Studies
- About
- Knowledge Centre
DownloadsProduct Brochures
Cpd’s & TrainingContinuing Professional Development
Latest NewsExpertise and resources to provide specifiers
Meet the TeamThe faces behind the team at CORE
TestimonialsRead all our testimonials from Trustpilot
SectorsDiscover CORE products perfect for your sector.
- Buy Near Me
- Contact
Cover more ground with a full roll.
A lightweight full-roll nonwoven geotextile for routine separation and filtration in groundworks, roads, parking, drainage and landscape construction.
The entry full-roll nonwoven option in this CORE range, combining high water permeability with a practical 4.5 m wide roll for larger areas.
- Separation between soil and granular layers
- Filtration within compatible drainage build-ups
- High normal-to-plane water flow
- Full-roll coverage for larger sites
- CBR puncture
- 1,000 N
- Water permeability
- 120 L/m².s
- Nominal roll coverage
- 450 m²
| Property | Value | Test / reference |
|---|---|---|
| Construction | Nonwoven geotextile | Product description |
| Tensile strength - MD | 6 kN/m | EN ISO 10319 |
| Tensile strength - CMD | 6 kN/m | EN ISO 10319 |
| Elongation at maximum load - MD | 45% | EN ISO 10319 |
| Elongation at maximum load - CMD | 55% | EN ISO 10319 |
| Dynamic perforation resistance | 40 mm | EN ISO 13433 |
| CBR puncture resistance | 1,000 N | EN ISO 12236 |
| Water permeability | 120 L/m².s | EN ISO 11058 |
| Characteristic opening size | 140 µm | EN ISO 12956 |
| Thickness under 2 kPa | 0.85 mm | EN ISO 9863-1 |
| Mass per unit area | 80 g/m² | EN ISO 9864 |
MD means machine direction, along the roll. CMD means cross-machine direction, across the roll. Values describe the material; they are not a vehicle load rating.
Match the declared properties to the project specification and confirm the current product data before ordering.
Roll sizes.
Use the nominal area to plan your order, then allow for overlaps, cutting and site geometry.
Check availability| Roll size | Nominal area |
|---|---|
| 4.5 m × 100 m | 450.00 m² |
Where it works.
- Roads, car parks and hardstandings
- Groundworks and industrial-unit construction
- Soakaways and sustainable drainage
- Landscape drainage and separation
Choosing for your project.
- Choose a nonwoven grade around filtration, puncture and installation-damage requirements, not mass alone.
- This product is not presented as a woven basal-reinforcement geotextile.
Share the site conditions, planned build-up and drawings with our team.
Discuss your projectInstallation guidance.
Prepare the ground, maintain continuity and protect the material during construction. Follow the approved project detail for overlaps, cover and compaction.
Open the geosynthetics guide- Prepare the groundRemove sharp obstructions and level deep ruts or voids so the fabric is supported.
- Lay and overlapRoll out to follow the ground contours without bridging hollows. Maintain the overlaps required by the project detail.
- Place the coverSpread the specified fill from the edge or an already covered area. Keep vehicles off exposed fabric.
- Inspect and protectCheck continuity and repair damage before covering. Cover promptly and follow the installation guide for the required cover and compaction.
Product questions.
What is MultiTrack 700 mainly used for?
It is a general full-roll nonwoven for separation and filtration in groundworks, drainage, roads, car parks and landscape construction.
How does it compare with MultiTrack 1000?
MT700 has lower declared tensile and puncture values. MT1000 is the more robust general-purpose grade, while MT700 is the economical full-roll option for less demanding interfaces.
Is the 450 m² figure an installed coverage?
No. It is the nominal roll area calculated from 4.5 m x 100 m. Allow for overlaps, cuts, waste and site geometry when calculating quantities.
Is nominal roll area the installed coverage?
No. Allow for overlaps, cuts and the shape of the area. The roll table gives the full roll area before those allowances.
Plan your next job.
Talk to CORE about specification, quantities and trade supply.
Copyright CORE 2026 Website design and marketing by KEATESMEDIA & UnityOnline
