- Products
-
CORE EDGE Flexible Steel Edging & Tree Rings
-
CORE DRIVE Gravel Driveway Stabiliser
-
CORE Tree Root Protection ‘No Dig’ Construction
-
CORE VUBA Resin Distribution Centre
-
CORE DATUM EDGE Heavy Duty Landscape Edging
-
CORE COMMERCIAL Heavy Duty Gravel Stabiliser
-
CORE DRAINAGE Drainage Cells & Board
-
CORE PRO EDGE Aluminium Landscape Edging
-
CORE PATH Gravel Pathway Stabiliser
-
CORE WATER CRATE Soakaway & Attenuation Crates
-
CORE GRASS Grass Reinforcement & Protection
-
CORE GEOSYNTHETICS Geogrids & Geosynthetics
-
CORE PLANTERS Commercial Planters
-
CORE EQUESTRIAN Specialist Equine Surfacing
-
CORE GLOW Glow In The Dark Aggregates
-
- Case Studies
- About
- Knowledge Centre
DownloadsProduct Brochures
Cpd’s & TrainingContinuing Professional Development
Latest NewsExpertise and resources to provide specifiers
Meet the TeamThe faces behind the team at CORE
TestimonialsRead all our testimonials from Trustpilot
SectorsDiscover CORE products perfect for your sector.
- Buy Near Me
- Contact
A more robust separation layer.
A full-roll nonwoven geotextile with 8 kN/m tensile strength in both principal directions and 1,500 N CBR puncture resistance for more demanding separation and filtration duties.
A step up from MultiTrack 700 where the project needs greater tensile and puncture performance while retaining high water permeability.
- Separation of soil and granular construction layers
- Filtration and drainage interfaces
- Improved puncture resistance over MT700
- Full-roll coverage for civil and landscape works
- CBR puncture
- 1,500 N
- Water permeability
- 110 L/m².s
- Tensile strength MD / CMD
- 8 / 8 kN/m
Technical specification.
Declared properties for CORE MultiTrack 1000.
| Property | Value | Test / reference |
|---|---|---|
| Construction | Nonwoven geotextile | Product description |
| Tensile strength - MD | 8 kN/m | EN ISO 10319 |
| Tensile strength - CMD | 8 kN/m | EN ISO 10319 |
| Elongation at maximum load - MD | 45% | EN ISO 10319 |
| Elongation at maximum load - CMD | 50% | EN ISO 10319 |
| Dynamic perforation resistance | 34 mm | EN ISO 13433 |
| CBR puncture resistance | 1,500 N | EN ISO 12236 |
| Water permeability | 110 L/m².s | EN ISO 11058 |
| Characteristic opening size | 120 µm | EN ISO 12956 |
MD means machine direction, along the roll. CMD means cross-machine direction, across the roll. Values describe the material; they are not a vehicle load rating.
Match the declared properties to the project specification and confirm the current product data before ordering.
Roll sizes.
Use the nominal area to plan your order, then allow for overlaps, cutting and site geometry.
Check availability| Roll size | Nominal area |
|---|---|
| 4.5 m × 100 m | 450.00 m² |
Where it works.
- Roads, car parks and industrial hardstandings
- Drainage systems, soakaways and SuDS
- Groundworks with higher installation-robustness needs
- Landscape and civil-engineering separation layers
Choosing for your project.
Share the site conditions, planned build-up and drawings with our team.
Discuss your projectInstallation guidance.
Prepare the ground, maintain continuity and protect the material during construction. Follow the approved project detail for overlaps, cover and compaction.
Open the geosynthetics guide- Prepare the groundRemove sharp obstructions and level deep ruts or voids so the fabric is supported.
- Lay and overlapRoll out to follow the ground contours without bridging hollows. Maintain the overlaps required by the project detail.
- Place the coverSpread the specified fill from the edge or an already covered area. Keep vehicles off exposed fabric.
- Inspect and protectCheck continuity and repair damage before covering. Cover promptly and follow the installation guide for the required cover and compaction.
Product questions.
When should I choose MT1000 rather than MT700?
Choose MT1000 when the project needs the higher 8 kN/m tensile strength and 1,500 N puncture resistance, subject to the required filtration and installation conditions.
Is nominal roll area the installed coverage?
No. Allow for overlaps, cuts and the shape of the area. The roll table gives the full roll area before those allowances.
Plan your next job.
Talk to CORE about specification, quantities and trade supply.
Copyright CORE 2026 Website design and marketing by KEATESMEDIA & UnityOnline
