- Products
-
CORE EDGE Flexible Steel Edging & Tree Rings
-
CORE DRIVE Gravel Driveway Stabiliser
-
CORE Tree Root Protection ‘No Dig’ Construction
-
CORE VUBA Resin Distribution Centre
-
CORE DATUM EDGE Heavy Duty Landscape Edging
-
CORE COMMERCIAL Heavy Duty Gravel Stabiliser
-
CORE DRAINAGE Drainage Cells & Board
-
CORE PRO EDGE Aluminium Landscape Edging
-
CORE PATH Gravel Pathway Stabiliser
-
CORE WATER CRATE Soakaway & Attenuation Crates
-
CORE GRASS Grass Reinforcement & Protection
-
CORE GEOSYNTHETICS Geogrids & Geosynthetics
-
CORE PLANTERS Commercial Planters
-
CORE EQUESTRIAN Specialist Equine Surfacing
-
CORE GLOW Glow In The Dark Aggregates
-
- Case Studies
- About
- Knowledge Centre
DownloadsProduct Brochures
Cpd’s & TrainingContinuing Professional Development
Latest NewsExpertise and resources to provide specifiers
Meet the TeamThe faces behind the team at CORE
TestimonialsRead all our testimonials from Trustpilot
SectorsDiscover CORE products perfect for your sector.
- Buy Near Me
- Contact
CORE TerraTrack Pro.
High-performance nonwoven protection and filtration geotextile
View technical specification
Protection for demanding interfaces.
A 300 g/m² superior nonwoven geotextile for demanding separation, filtration and protection duties. Its high puncture resistance and fine characteristic opening size support robust ground and membrane interfaces.
The highest-puncture-resistance nonwoven grade in this CORE selection, intended where a more robust protection or filtration layer is needed.
- Robust separation between dissimilar layers
- Filtration with a fine characteristic opening size
- Protection of compatible membranes and interfaces
- Drainage and permeable-paving support where specified
- CBR puncture
- 3,700 N
- Mass per unit area
- 300 g/m²
- Tensile strength MD / CMD
- 21.5 / 21.5 kN/m
| Property | Value | Test / reference |
|---|---|---|
| Construction | Nonwoven geotextile | Product description |
| Tensile strength - MD | 21.5 kN/m | EN ISO 10319 |
| Tensile strength - CMD | 21.5 kN/m | EN ISO 10319 |
| Elongation at maximum load - MD | 65% | EN ISO 10319 |
| Elongation at maximum load - CMD | 80% | EN ISO 10319 |
| Dynamic perforation resistance | 11 mm | EN ISO 13433 |
| CBR puncture resistance | 3,700 N | EN ISO 12236 |
| Water permeability | 60 L/m².s | EN ISO 11058 |
| Characteristic opening size | 80 µm | EN ISO 12956 |
| Mass per unit area | 300 g/m² | EN ISO 9864 |
MD means machine direction, along the roll. CMD means cross-machine direction, across the roll. Values describe the material; they are not a vehicle load rating.
Match the declared properties to the project specification and confirm the current product data before ordering.
Roll sizes.
Use the nominal area to plan your order, then allow for overlaps, cutting and site geometry.
Check availability| Roll size | Nominal area |
|---|---|
| 2.25 m × 25 m | 56.25 m² |
| 2.25 m × 90 m | 202.50 m² |
| 4.5 m × 90 m | 405.00 m² |
Where it works.
- Membrane and attenuation-tank protection
- Permeable paving and drainage build-ups
- Erosion-control and heavy-duty landscape interfaces
- Ground-engineering separation and filtration
Choosing for your project.
- Confirm the substrate, cover, stone size and installation-damage risk before relying on the protection function.
- It is a permeable geotextile, not an impermeable membrane or certified root barrier.
Share the site conditions, planned build-up and drawings with our team.
Discuss your projectInstallation guidance.
Prepare the ground, maintain continuity and protect the material during construction. Follow the approved project detail for overlaps, cover and compaction.
Open the geosynthetics guide- Prepare the groundRemove sharp obstructions and level deep ruts or voids so the fabric is supported.
- Lay and overlapRoll out to follow the ground contours without bridging hollows. Maintain the overlaps required by the project detail.
- Place the coverSpread the specified fill from the edge or an already covered area. Keep vehicles off exposed fabric.
- Inspect and protectCheck continuity and repair damage before covering. Cover promptly and follow the installation guide for the required cover and compaction.
Product questions.
What is the main difference between TerraTrack Pro and the standard nonwovens?
TerraTrack Pro has the highest declared CBR puncture resistance and the smallest characteristic opening size of these six CORE-supplied grades. That makes it the first comparison point for demanding protection and filtration duties.
Can it protect an impermeable membrane?
It can provide a protection layer where the membrane supplier and project design accept the build-up. Confirm the membrane, substrate, cover and construction-damage risk rather than relying on product mass alone.
Is TerraTrack Pro waterproof?
No. It is a permeable nonwoven geotextile. The declared water permeability is 60 L/m².s.
Is nominal roll area the installed coverage?
No. Allow for overlaps, cuts and the shape of the area. The roll table gives the full roll area before those allowances.
Plan your next job.
Talk to CORE about specification, quantities and trade supply.
Copyright CORE 2026 Website design and marketing by KEATESMEDIA & UnityOnline
