- Products
-
CORE EDGE Flexible Steel Edging & Tree Rings
-
CORE DRIVE Gravel Driveway Stabiliser
-
CORE Tree Root Protection ‘No Dig’ Construction
-
CORE VUBA Resin Distribution Centre
-
CORE DATUM EDGE Heavy Duty Landscape Edging
-
CORE COMMERCIAL Heavy Duty Gravel Stabiliser
-
CORE DRAINAGE Drainage Cells & Board
-
CORE PRO EDGE Aluminium Landscape Edging
-
CORE PATH Gravel Pathway Stabiliser
-
CORE WATER CRATE Soakaway & Attenuation Crates
-
CORE GRASS Grass Reinforcement & Protection
-
CORE GEOSYNTHETICS Geogrids & Geosynthetics
-
CORE PLANTERS Commercial Planters
-
CORE EQUESTRIAN Specialist Equine Surfacing
-
CORE GLOW Glow In The Dark Aggregates
-
- Case Studies
- About
- Knowledge Centre
DownloadsProduct Brochures
Cpd’s & TrainingContinuing Professional Development
Latest NewsExpertise and resources to provide specifiers
Meet the TeamThe faces behind the team at CORE
TestimonialsRead all our testimonials from Trustpilot
SectorsDiscover CORE products perfect for your sector.
- Buy Near Me
- Contact
CORE FasTrack Orange.
High-visibility woven separation and reinforcement geotextile
View technical specification
A separation layer you can identify.
A bright orange version of the FasTrack 609 woven geotextile, combining the same declared mechanical and hydraulic properties with a conspicuous buried separation layer.
Selected where a woven separation or reinforcement layer should remain visually obvious during future excavation or inspection.
- Visible separation between dissimilar soil layers
- Tensile contribution in suitable reinforcement applications
- High-visibility buried layer for future works
- Woven polypropylene construction
- CBR puncture
- 1,500 N
- Tensile strength MD / CMD
- 18 / 10 kN/m
- Nominal roll coverage
- 450 m²
| Property | Value | Test / reference |
|---|---|---|
| Construction | Woven geotextile | Product description |
| Material | Polypropylene | Manufacturer declaration |
| Tensile strength - MD | 18 kN/m | EN ISO 10319 |
| Tensile strength - CMD | 10 kN/m | EN ISO 10319 |
| Elongation at maximum load - MD | 25% | EN ISO 10319 |
| Elongation at maximum load - CMD | 25% | EN ISO 10319 |
| Dynamic perforation resistance | 19 mm | EN ISO 13433 |
| CBR puncture resistance | 1,500 N | EN ISO 12236 |
| Water permeability | 16 L/m².s | EN ISO 11058 |
| Characteristic opening size | 300 µm | EN ISO 12956 |
| Mass per unit area | 75 g/m² | EN ISO 9864 |
MD means machine direction, along the roll. CMD means cross-machine direction, across the roll. Values describe the material; they are not a vehicle load rating.
Match the declared properties to the project specification and confirm the current product data before ordering.
Roll sizes.
Use the nominal area to plan your order, then allow for overlaps, cutting and site geometry.
Check availability| Roll size | Nominal area |
|---|---|
| 4.5 m × 100 m | 450.00 m² |
Where it works.
- Contaminated / uncontaminated soil interfaces
- Haul roads, hardstandings and compounds
- Paved roads and granular construction layers
- Projects requiring a conspicuous buried separator
Choosing for your project.
- The orange colour provides visibility but does not make the product a detectable warning tape or service marker.
- It is permeable and is not a certified contaminant-containment barrier.
- The correct reinforcement product and design method remain project-specific.
Share the site conditions, planned build-up and drawings with our team.
Discuss your projectInstallation guidance.
Prepare the ground, maintain continuity and protect the material during construction. Follow the approved project detail for overlaps, cover and compaction.
Open the geosynthetics guide- Prepare the groundRemove sharp obstructions and level deep ruts or voids so the fabric is supported.
- Lay and overlapRoll out to follow the ground contours without bridging hollows. Maintain the overlaps required by the project detail.
- Place the coverSpread the specified fill from the edge or an already covered area. Keep vehicles off exposed fabric.
- Inspect and protectCheck continuity and repair damage before covering. Cover promptly and follow the installation guide for the required cover and compaction.
Product questions.
Is FasTrack Orange technically different from FasTrack 609A?
The current manufacturer sheets publish the same mechanical and hydraulic values. The distinguishing feature is the bright orange colour and its high visibility as a buried layer.
Does the orange fabric replace warning tape?
No. It is a high-visibility geotextile, not a detectable warning tape, service marker or substitute for site-specific permit-to-dig controls.
Can it contain contaminated material?
It can provide a visible separation layer, but it is permeable and is not an impermeable containment barrier. Contaminated-land requirements need project-specific design and approval.
Is nominal roll area the installed coverage?
No. Allow for overlaps, cuts and the shape of the area. The roll table gives the full roll area before those allowances.
Plan your next job.
Talk to CORE about specification, quantities and trade supply.
Copyright CORE 2026 Website design and marketing by KEATESMEDIA & UnityOnline
