Lightpro Plug-In Garden Lighting Transformer 150W with Timer (UK Plug)

The 150W Touch transformer powers a larger Lightpro 12V scheme: more fittings, or a mix of uplights and decklights that would push a 100W unit to its limit. This is the BS version with a UK 3-pin plug fitted, so it plugs into a suitable weatherproof socket without an adaptor.

The front panel is touch operated. In automatic mode the built-in light sensor switches the scheme on at dusk, and the run time is set in ten steps between one and ten hours. Rated IP44 in a black plastic case, with a 2 metre mains lead and a mounting plate, screws and wall plugs for wall fixing.

Key features

• 150W maximum load, usable in full as the unit is de-rated for LED loads
• BS 1363 UK 3-pin plug fitted
• Touch control, with dusk switching from the built-in light sensor and a 1 to 10 hour run timer
• M-connector included to start the cable run
• IP44 rated, 2 metre mains lead, mounting plate, screws and wall plugs supplied
• Protection class II, rated from -20C to +50C

System limits you must observe

• Maximum cable run is 80 metres from the transformer to the end of any one run. Beyond that, volt drop will dim or stop the lights, and the warranty no longer applies.
• Do not exceed the transformer’s stated maximum load. Lightpro transformers are already de-rated for LED, so the full stated wattage is usable.
• Use branch runs from the transformer rather than one long line to keep within the 80 metre limit.

Specifications

• Article number: 229A
• EAN: 8719979283957
• Voltage: 230V mains in (UK 3-pin plug), 12V out to the Lightpro system
• Maximum load: 150 W
• Dimensions (H x W x D): 185 mm x 123 mm x 77 mm
• Material: Plastic
• Colour: Black
• IP rating: IP44
• Electrical protection class: II
• Smart: No
• Cable length: 2 m
• AC/DC compatible: No
• Operating temperature: -20 °C to +50 °C
• Supplied accessories: M-connector
• Fixings supplied: Screws, Plugs, Mounting plate
• Warranty: 6 years